How to Fix Any Leakage Issues With the Heater
As soon as winters come around, they reduce the humidity and hotness of summers - which is a relief for everyone. Imagine that it’s freezing cold outside, snow is piled up right outside your front door, and on top of that, your heater starts leaking. Instead of panicking and yelling at others in the house, you should be aware of how to handle the heater leakage. Mentioned below are a few heater tips you can follow to fix any issues you might face.
1. Turn off the water supply
If you’re facing a water leak and intend to carry out the heater repair yourself, then the first step to prevent heater leakage is to shut off the water supply. Your gas heater should have a valve placed somewhere in the back, either a handle or a wheel-style valve. Once the water valve is turned off, then you can focus on other things. If you have an electric heater, it will have an on and off button located somewhere for the water supply on the unit, and you can simply turn it off.
2. Disconnect the power
Once the water supply has been cut off to prevent heater leakage, you turn off the power supply for your gas or electric heater before you work on the heater maintenance. This is done to ensure that you do not get an electric shock while working. For an electric heater, you can directly turn off the power from the main breaker, and if you’re using a gas heater, then it is recommended that you shut off the gas valve line. Once both the supply and the power are turned off, you will feel more at ease and be able to focus on the problem and where it is coming from.
Similarly, if you have an electricity leakage, then you need to be very cautious about it as water and electricity are a deadly combination. Turning off the main breaker is the first step you should take, along with turning off with the water switch. Clear the area from any water before the current causes a short circuit.
3. Figure out why the leakage source
Water leaks usually happen drop by drop and then start increasing with time. So, initially, it is difficult to determine the place or cause of the heater leakage. But there could be a few reasons why it could be leaking.
- Check the fittings of the pipe on your heater – At times, it is possible that the leak is taking place because the pipes weren’t fixed properly at the time of heater installation. This doesn’t require much effort as you can fix those pipes correctly with a wrench.
- Check your water pressure – Before calling in heater service professionals, check the water pressure. If the pressure is too high, it should be reduced as it can cause a leak and damage the pipes.
4. Be extra careful in case of a gas leakage
In the event of gas leak from the heater, the first thing you need to do is turn off the switch immediately and avoid touching anything. Ensure no one is in the room and try identifying where the gas leak is coming from. Remember that a gas leak is dangerous and it may cause a fire. If you cannot figure out where the leak is coming from, it is best that you call Heating Experts on 1300 100 040 to book an expert heater technician.
If fixing heater leakage issues are still not resolved despite following all of the tips above, it is recommended you call in the professionals before it is too late. As our professional workers are qualified and more experienced, we will be able to determine the cause more quickly and resolve the issues before you know it.