Help! My AC Won’t Turn on

Air conditioning problems are no fun. Without a working AC, you may have to deal with the heat, sweat, and discomfort of the summer.

We all know that air conditioners are a necessity in the summer. But, how do you deal with an air conditioner that won't turn on?

In this blog post, we'll discuss six troubleshooting tips to help get your AC back up and running as quickly as possible!

6 Air Conditioner Troubleshooting Tips

1) Make Sure the Circuit Breaker Is Working

It is most likely that the circuit breaker has tripped. It's easy for it to flip if there are too many appliances running at once. So first, try flipping the switch back on and see if your AC starts working again. Start by checking all your AC unit breakers. Fixing and resetting the breaker might not be as difficult as you may think. When the breaker trips, flip it back to its original position and wait a few seconds before turning the AC back on.

2) Thermostat May Require Replacement

The second most common cause of an AC malfunction is a dead thermostat. It might be time to replace or reset your thermostat if there is no problem with the breaker.

One of the reasons this happens could be because you have set the temperature too low on your unit.

If the compressor doesn't shut off after reaching its set point, it will run until an external force stops it, or no cooling fluid is left in its system.

3) Check for Leaks

A leaky AC unit is another thing that can impair its performance. If water is seeping into the unit or dripping onto your floor, this could be one of the reasons why your system won't turn on.

The best way to find out if there are any leaks is to inspect the air conditioning unit from time to time.

If you don't feel comfortable inspecting your system, it's best to contact a professional from Heating Experts to get the job done.

4) Air Filters Can Be Messy

Filters are necessary for your air conditioning unit to maintain a clean airflow. However, a messy air filter can cover the coils with freezing droplets that can disrupt the functioning of an AC.

You shouldn't just replace them when they become dirty. Instead, make sure you clean these filters regularly so that your system runs smoothly.

5) Check Out the Drainage Pan & Lines for Obstructions

If you don't clean out your drain pan and lines, this could be one of the reasons why your unit isn't working. Not only does it make a mess on your floors, but it also makes it difficult for water from the AC unit to flow through those areas.

This blockage can cause your AC to stop. Conversely, eliminating the blockage can help you restore the functioning of your AC within minutes.

6) Overheating Can Be a Major Problem

Another common problem with an AC can occur when the unit overheats. Sometimes after running for hours or days at a time, air conditioners can heat up quickly and may turn off.

When it does, this usually means that there is a more significant issue going on inside your system, and you might need to get help from Heating Experts' professionals before things get worse.

Final Words

These are the most common problems that can affect the working of your AC. If you cannot resolve them after reading this post, it's time to hire an expert from Heating Experts and let us take care of all your cooling needs! Call us now at 1300 100 040.